At a time when there is increasing government and local council regulation on building projects and the accompanying architectural hardware - in July 2007, Guardian Lock & Engineering Co. Ltd. successfully fire tested* it's entire range of UK manufactured locks & latches to BS EN 1634-1, for use on 30 minute & 1 hour fire doors.

The company took this step to help architectural hardware specifier's & suppliers whilst scheduling, as they can have confidence that choosing any of Guardian's UK manufactured locks & latches will allow them conform to fire safety regulations*. 

*Subject to their use on doors of the appropriate construction, and with the appropriate hardware and fittings.

NB:  Where cylinders other than "Imperial" are used, it is specifier’s responsibility to ensure compatibility with lock case.
 

 G72-7000     Euro-profile cylinder mortice sashlock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by key from either side using a double cylinder or by key outside and thumbturn inside using a single cylinder with turn.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons and 38mm centre horizontally and diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type P.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 G72-7002     Euro-profile cylinder roller bolt mortice sashlock
OPERATION: Roller bolt operated by lever handle from either side. Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons and 38mm centre horizontally and diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type P.
LATCHBOLT. Brass, roller bolt to suit either hand. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 G72-7004    Euro-profile cylinder mortice deadlock
OPERATION: Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons.
STRIKER PLATE. Type C.
   
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
   
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:

DL/G72-3051-13mm DL/G72-3052-19mm DL/G72-3053-25mm

 

 

 G72-7006     Euro-profile cylinder mortice sliding door lock
OPERATION: Bolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons.
STRIKER PLATE. Type C.
   
DEADBOLT. Brass, expanded claw. Throw 14mm
   
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:

DL/G72-3051-13mm DL/G72-3052-19mm DL/G72-3053-25mm

 

 

 

 G72-7007     Euro-profile cylinder escape mortice deadlock
OPERATION:

In standard one-way action, deadbolt thrown or withdrawn by key from outside and withdrawn by lever handle or turn knob from inside using a single cylinder or thrown or withdrawn by key from either side and withdrawn by lever handle or turn knob from inside using a double cylinder. In two-way action, deadbolt may additionally be thrown by lever handle or turn knob from inside.
Use with turn operated cylinders is not recommended.

SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons.
STRIKER PLATE. Type C.
   
DEADBOLT. Brass, with two hardened steel rollers. Throw 13mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action standard. Two-way action available on request.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside side such as Guardian G9000
b) Key either side such as Guardian G9001

REBATE UNITS
TO SUIT:

DL/G72-3051-13mm DL/G72-3052-19mm DL/G72-3053-25mm

 

 

 G72-7008     Euro-profile cylinder mortice nigh latch
OPERATION: Latchbolt operated by key outside and lever handle or turn knob from inside using a single cylinder or by key from either side using a double cylinder.
Use with turn operated cylinders is not recommended.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons and 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type E.
LATCHBOLT. Brass, Projection 12mm. Hand must be specified.

Also available with non-handed roller bolt.
   
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside side such as Guardian G9000
b) Key either side such as Guardian G9001

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 G72-7008HB     Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key outside and lever handle or turn knob from inside using a single cylinder or by key from either side using a double cylinder. The bolt may be held in the withdrawn position by means of a reverse turn of the key
Use with turn operated cylinders is not recommended.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons and 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type E.
LATCHBOLT. Brass, Projection 12mm. Hand must be specified.

Also available with non-handed roller bolt.
   
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside side such as Guardian G9000
b) Key either side such as Guardian G9001

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 

 G72-7009     Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key outside and lever handle or turn knob from inside using a single cylinder or by key from either side using a double cylinder. Bolt and handle may be deadlocked by key from either side.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons and 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type E.
LATCHBOLT. Brass, Projection 12mm. Hand must be specified.

Also available with non-handed roller bolt.
   
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside side such as Guardian G9000
b) Key either side such as Guardian G9001
c) Turn inside and key outside such as Guardian G9002.

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 

 

 G72-7010     Euro-profile cylinder mortice night latch
OPERATION: Latchbolt operated by key from either side and lever handle or turn knob from inside using a double cylinder. Deadbolt operated by key from either side using a double cylinder or by key from outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons and 38mm centre diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type P.
LATCHBOLT. Brass, Projection 12mm. Hand must be specified.

Also available with non-handed roller bolt.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 

 

 

 G72-7080     Euro-profile cylinder mortice night latch with anti-thrust bolt - No longer available
OPERATION: Latchbolt operated by key from either side and lever handle or turn knob from inside using a double cylinder. Deadbolt operated by key from either side using a double cylinder or by key from outside and thumb turn inside using a single cylinder with turn. When door is shut the Latchbolt is locked against end pressure.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons and 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type T.
LATCHBOLT. Brass, Projection 12mm. Hand must be specified.
ANTI-THRUST BOLT. Brass. Effective at door gaps up to 6mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever fake watches handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:

On application.

 

 

 

 

 

 

 G72-7089     Euro-profile cylinder mortice night latch with anti-thrust bolt - No longer available
OPERATION: Latchbolt operated by key from outside and lever handle or turn knob from inside using a single cylinder or by key from either side using a double cylinder. When door is shut the latchbolt is locked against end pressure.
Use with turn operated cylinders is not recommended.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons and 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type V.
LATCHBOLT. Brass, Projection 12mm. Hand must be specified.
ANTI-THRUST BOLT. Brass. Effective at door gaps up to 6mm.
   
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key outside side such as Guardian G9000
b) Key either side such as Guardian G9001

REBATE UNITS
TO SUIT:

On application.

 

 

 

 

 

 

 

 

 G72-7072     Euro-profile cylinder push / pull heavy duty roller bolt mortice sashlock
OPERATION: Roller bolt operated by push or pull from either side. Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons.
STRIKER PLATE. Type S.
LATCHBOLT. Brass, adjustable roller bolt to suit either hand.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
   
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:

PP/G72-3051-13mm PP/G72-3052-19mm PP/G72-3053-25mm

 

 

 

 

 G7207     Euro-profile cylinder escape mortice sashlock - No longer available
OPERATION: Latchbolt operated by key from outside and lever handle from inside and deadbolt operated by key from either side using a double cylinder. When locked lever handle from inside withdraws both latchbolt and deadbolt. Not suitable for use with turn operated cylinders.
SPECIFICATION:
CASE.

Zinc plated. Pierced to accept 38mm centre bolt through fixing escutcheons and 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type R.
LATCHBOLT. Steel, nickel plated . Projection 12mm. Hand must be specified.
DEADBOLT. Steel, laminated, nickel plated. Double throw 12mm/24mm.
FOLLOWER. Steel, to suit 9mm square spindle. One-way action sprung to suit unsprung lever handle furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
Key either side such as Guardian G9001

REBATE UNITS
TO SUIT:

On application.

 

 

 

 

 

 

 

 

 

 

 G7208     Euro-profile cylinder panic escape mortice sashlock - Limited Stock Available 
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by key from either side using a double cylinder. When locked lever handle from inside withdraws both latchbolt and deadbolt. Not suitable for use with turn operated cylinders.
SPECIFICATION:
CASE.

Zinc plated. Pierced to accept 38mm centre bolt through fixing escutcheons and 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type R.
LATCHBOLT. Steel, nickel plated . Projection 12mm. Hand must be specified including direction of opening.
DEADBOLT. Steel, laminated, nickel plated. Double throw 12mm/24mm.
FOLLOWER. Steel, to suit 9mm square spindle. One-way action sprung to suit unsprung lever handle furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
Key either side such as Guardian G9001

REBATE UNITS
TO SUIT:

On application.

 

 

 

 

 

 

 

 

 

 

 

 G7240    Euro-profile cylinder upside down mortice sashlock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by key from either side using a double cylinder or by key from outside and thumbturn inside using a single cylinder with turn.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons and 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type Z.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 

 

 

 

 

 G7250    Euro-profile cylinder mortice sashlock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by key from either side using a double cylinder or by key from outside and thumbturn inside using a single cylinder with turn.
SPECIFICATION:
CASE.

Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons and 38mm centre horizontally and diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Box type Q.
LATCHBOLT. Brass. Projection 12mm.
DEADBOLT. Stainless steel. Throw 25mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001
b) Turn inside and key outside such as Guardian G9002

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 

 

 

 

 

 

Manufacture suspended until further notice

 G7270    Oval-profile cylinder upside down mortice sashlock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by key from either side using a double cylinder or by key from outside and thumbturn inside using a single cylinder with turn.
SPECIFICATION:
CASE.

Pierced to accept 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type P.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass, with two hardened steel rollers. Throw 14mm
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9011
b) Turn inside and key outside such as Guardian G9012

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 

 

 

 

 

 

 

 

 

 G7278N    Euro-profile cylinder panic escape mortice sashlock
OPERATION:

Latchbolt operated by lever handle from either side or by cylinder. Deadbolt operated by key from either side using a double cylinder. When locked lever handle from inside withdraws both latchbolt and deadbolt simultaneously.

SPECIFICATION:
CASE.

Powder coated. Pierced to accept 38mm centre bolt through fixing escutcheons and 38mm centre horizontally opposed bolt through fixing furniture.
FOREND. Stainless Steel.
STRIKER PLATE. Maximum door thickness 60mm c/w back box.
HANDING. Fully reversible latchbolt and follower for direction of opening.
LATCHBOLT. Steel, chrome plated, reversible.  Projection 12mm.
DEADBOLT. Steel,single throw 16mm.
FOLLOWER. Steel, to suit 8mm square split spindle. One-way action to suit sprung lever handle furniture only.
CYLINDER.

Not supplied. May be used with the following cylinders:
a) Key either side such as Guardian G9001

REBATE UNITS
TO SUIT:

On application.

 

 

 

 

 

 

 

 

 

 G72-4053    Mortice latch
OPERATION: Latchbolt operated by lever handle from either side.
SPECIFICATION:
CASE.

Pierced to accept 38mm centre horizontally and diagonally opposed bolt through fixing furniture.
STRIKER PLATE. Type E.
LATCHBOLT. Brass, reversible. Projection 12mm.
   
FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle replica watches furniture heavy duty springing should be specified.
 

 

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 

 

 

 

 

 

 

 

 G72-8020 G72-8021     Upright bathroom mortice lock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by turn from either side.
SPECIFICATION:
CASE.

Pierced to accept 38mm centre horizontally and diagonally opposed bolt through fixing furniture and 38mm centre horizontally opposed bolt through fixing indicator furniture.
STRIKER PLATE. Type P.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass. Throw 14mm
LATCHBOLT FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture only. For unsprung lever handle furniture heavy duty springing should be specified.
DEADBOLT FOLLOWER

G8020 Brass, to suit 5mm square spindle
G8021 Brass, to suit 8mm square rolex uk spindle.

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 G72-8020RB G72-8021RB     Upright roller bolt bathroom mortice lock
OPERATION: Roller bolt operated by lever handle from either side. Deadbolt operated by turn from either side.
SPECIFICATION:
CASE.

Pierced to accept 38mm centre horizontally and diagonally opposed bolt through fixing furniture and 38mm centre horizontally opposed bolt through fixing indicator furniture.
STRIKER PLATE. Type P.
LATCHBOLT. Brass, roller bolt to suit either hand. Projection 12mm.
DEADBOLT. Brass. Throw 14mm
LATCHBOLT FOLLOWER. Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture only. For unsprung lever handle furniture heavy duty springing should be specified.
DEADBOLT FOLLOWER

G8020RB Brass, to suit 5mm square spindle
G8021RB Brass, to suit 8mm square spindle.

REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 

 G72-8072    Heavy duty push / pull roller bolt bathroom mortice lock
OPERATION: Roller bolt operated by push or pull from either side. Deadbolt operated by turn from either side.
SPECIFICATION:
CASE.

Pierced to accept 38mm centre horizontally opposed bolt through fixing indicator furniture.
STRIKER PLATE. Type S.
LATCHBOLT. Brass, adjustable roller bolt to suit either hand.
DEADBOLT. Brass. Throw 14mm.
FOLLOWER.

Brass, to suit 5mm square spindle.

   
REBATE UNITS
TO SUIT:

PP/G72-3051-13mm PP/G72-3052-19mm PP/G72-3053-25mm

 

 

 G72-8872    Heavy duty push / pull roller bolt bathroom mortice lock
OPERATION: Roller bolt operated by push or pull from either side. Deadbolt operated by turn from either side.
SPECIFICATION:
CASE.

Pierced to accept 38mm centre horizontally opposed bolt through fixing indicator furniture.
STRIKER PLATE. Type S.
LATCHBOLT. Brass, adjustable roller bolt to suit either hand
DEADBOLT. Brass. Throw 14mm.
FOLLOWER.

Brass, to suit 8mm square spindle.

   
REBATE UNITS
TO SUIT:

PP/G72-3051-13mm PP/G72-3052-19mm PP/G72-3053-25mm

 

 

 G8220    Upside down bathroom mortice lock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by turn from either side.
SPECIFICATION:
CASE.

Pierced to accept 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type P.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass. Throw 14mm.
LATCHBOLT FOLLOWER.

Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture only.

DEADBOLT FOLLOWER Brass, to suit 5mm square spindle.
REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm

 

 

 G8221    Upside down bathroom mortice lock
OPERATION: Latchbolt operated by lever handle from either side. Deadbolt operated by turn from either side.
SPECIFICATION:
CASE.

Pierced to accept 38mm centre horizontally opposed bolt through fixing furniture.
STRIKER PLATE. Type P.
LATCHBOLT. Brass, reversible. Projection 12mm.
DEADBOLT. Brass. Throw 14mm.
LATCHBOLT FOLLOWER.

Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture only.

DEADBOLT FOLLOWER Brass, to suit 8mm square spindle.
REBATE UNITS
TO SUIT:

G72-3051-13mm G72-3052-19mm G72-3053-25mm